Guarantee conditions and technical information
Guarantee conditions
Chip policy 2012
Paint colour and guarantee
U-values of door panels
AluFire®
The AluFire® door panel can be used in a fire-resistant door frame combination. The panel has a thickness of 54 mm but is also available in a thickness of 61 mm or 63 mm. Because the door panel amply fulfilled the 30-minute requirement during the fire test EN 1634-2008, both the length and the width can be increased by 15%, taking into account not exceeding a surface area increase of 20%. This means that the door panel can have a maximum width of 109 cm and a maximum height of 270 cm. The area may not exceed 2.68 m².
Naturally, the AluFire® is also available in a conventional (not fire resistant) version.
The name is then AluCorkPlex®
Specifications
Thicknesses
54 mm, 61 and 63 mm
Sizes
2350 x 950 mm as well as 15% higher and / or 15% wider with a maximum surface enlargement of 20% Length: maximum 270 cm, width: maximum 109 cm. Other sizes on request.
Face plywood
AluPlex® from 7.5 to 12 mm
Construction
Routable faces both sides and a core of expanded corkboard. AluFire® has 2 moisture-resistant aluminum layers of 0.3 mm thickness.
Finish
Top layer: Okoumé peeled veneer.
Adhesion
Exterior
Time of delivery
On request
Application
Fireproof exterior door. Also available in non-fire-resistant design as AluCorkPlex®
ID-Chip
Certificates & statements
Plywood certificate KOMO BRL 1705
FSC® CU-COC-808411 certificaat 2022-2027
BM Trada Q-Mark Door Blank certificate
General sales agreements
AluFire
Technical datasheet
Processing instructions are specific according to fire resistance report Peutz Y1406-1-RA-001 and are available on request.